Magnesium Sulfate BP USP, FCC Food, ACS Reagent Grade Manufacturers
MSDS of Magnesium Sulfate Heptahydrate
MSDS of Magnesium Sulfate Monohydrate Dried & Anhydrous
We also offer Magnesium Sulfate Anhydrous with practically nil moisture.
Dried Magnesium Sulphate BP Magnesium Sulfate
Dried Epsom Salts
Magnesium Sulphate Dried is offered in BP grade
DEFINITION
Dried Magnesium Sulphate contains not less than 62.0% and not more than 70.0% of MgSO4.
It may be prepared by drying magnesium sulphate at 100° until it has lost approximately 25% of its weight.
CHARACTERISTICS
A white powder.
Freely soluble in water; dissolves more rapidly in hot water.
IDENTIFICATION
Yields the reactions characteristic of magnesium salts and of sulphates.
TESTS
Acidity or alkalinity: To 10 ml of a 7.5% w/v solution in carbon dioxide-free water add 0.05 ml of phenol red solution. Not more than 0.2 ml of either 0.01M hydrochloric acid VS or 0.01M sodium hydroxide VS is required to change the colour of the solution.
Arsenic: 0.33 g dissolved in 25 ml of water complies with the limit test for arsenic, (3 ppm).
Heavy metals: Dissolve 1.3 g in 20 ml of water and add 1 g of ammonium chloride. 12 ml of the resulting solution complies with limit test A for heavy metals, Appendix VII. Use lead standard solution(1 ppm Pb) to prepare the standard (15 ppm).
Iron: 0.33 g dissolved in 10 ml of water complies with the limit test for iron, Appendix VII (30 ppm).
Chloride: 0.13 g dissolved in 15 ml of water complies with the limit test for chlorides, Appendix VII (400 ppm).
Insoluble matter: 7.5 g dissolves in 20 ml of water, producing a solution which may be slightly turbid at first but which becomes clear in a few minutes.
Magnesium Sulphate Heptahydrate BP
Epsom Salts
MgSO4,7H2O 246.5 CAS Number 10034-99-8
Action and use
Osmotic laxative; used in treatment of electrolyte deficiency.
DEFINITION
Content
99.0 per cent to 100.5 per cent (dried substance).
CHARACTERS
Appearance: White or almost white, crystalline powder or brilliant, colourless crystals.
Solubility: Freely soluble in water, very soluble in boiling water, practically insoluble in ethanol (96 per cent).
IDENTIFICATION
A. It gives the reactions of sulphates.
B. It gives the reaction of magnesium.
TESTS
Solution S: Dissolve 5.0 g in water R and dilute to 50 ml with the same solvent.
Appearance of solution: Solution S is clear and colourless.
Acidity or alkalinity: To 10 ml of solution S add 0.05 ml of phenol red solution. Not more than 0.2 ml of 0.01 M hydrochloric acid or 0.01 M sodium hydroxide is required to change the colour of the indicator.
Chlorides: Maximum 300 ppm.
Arsenic: Maximum 2 ppm, determined on 0.5 g.
Iron: Maximum 20 ppm.
Heavy metals: Maximum 10 ppm.
Loss on drying: 48.0 per cent to 52.0 per cent, determined on 0.500 g by drying in an oven at 110-120°C for 1 h and then at 400°C to constant mass.
Magnesium Sulfate FCC Food grade
Epsom Salt
MgSO4·xH2O Formula wt, monohydrate 138.38
Formula wt, heptahydrate 246.47
INS: 518
CAS Number 14168-73-1 monohydrate
CAS Number 10034-99-8 heptahydrate
CAS Number15244-36-7 dried
Magnesium Sulphate Dried is offered in FCC grade
DESCRIPTION
Magnesium Sulfate occurs as a colorless crystal or a granular crystalline powder. It is produced with one or seven molecules of water of hydration or in a dried form containing the equivalent of about 2.3 waters of hydration. It is readily soluble in water, slowly soluble in glycerin, and sparingly soluble in alcohol.
Function: Nutrient.
REQUIREMENTS
Identification: A 1:20 aqueous solution gives positive tests for Magnesium and for Sulfate.
Assay: Not less than 99.5% of MgSO4 after ignition.
Lead: Not more than 4 mg/kg.
Loss on Ignition Monohydrate: Between 13.0% and 16.0%; Heptahydrate: Between 40.0% and 52.0%; Dried: Between 22.0% and 28.0%.
Selenium: Not more than 0.003%.
Magnesium Sulfate ACS Analytical Reagent
Magnesium Sulfate Heptahydrate
MgSO4 - 7H2O
Formula Wt 246.48
CAS Number 10034-99-8
REQUIREMENTS
Assay .............. 98.0-102.0% MgSO4-7H2O
pH of a 5% solution- 5.0-8.2 at 25C
MAXIMUM ALLOWABLE
Insoluble matter: 0.005%
Chloride (Cl): 5 ppm
Nitrate (NO3): 0.002%
Ammonium (NH4): 0.002%
Calcium (Ca): 0.02%
Manganese (Mn): 5 ppm
Potassium (K): 0.005%
Sodium (Na): 0.005%
Strontium (Sr): 0.005%
Heavy metals (as Pb): 5 ppm
Iron (Fe): 5 ppm |
